Відео

Well, I at first just cleaned it and that worked for that particular mouse as it had some hair + dust all over the scroll wheel. Thank you for taking the time to make this tutorial and let us save some money from buying a new mouse :D hope you have a lovely day! ❤

🎉😊

Thank you so so so much it reallly helped I fixed my garage and I subscribe as well thank you so much man

Hello thanks for info all the fans works during test mode but don’t seam to work now

Every time iam changing bios to change ssd..y it's always want to change up n down to change ssd ..it Wil not fixed one time give me solution

Well I have to give credit where credit is due. Thank you for helping me figure out how to open up to change the batteries. It was an excellent video! I changed out the batteries and changed it back from off to cool and my units started again and I said thank the Lord someone took the time to help me figure this out. As a female I feel empowered without having to call someone. I find myself you tubing everything!

How do you release pressure if overcharged? Hold the valve stem down with a screwdriver? Your video says fix, but you didn't explain how to release pressure.

I have the exac same refrigerator, and the blinking light, it blinks 3 times every single time. What can I do?. Someone can help with that problem please.

Whhhaaat ? Lol

Does it have to be a specific type of battery?

biggest snafu - its a LG

I have a LG fridge with Linear Compressor. Compressor tested and Ok I bought new starter relay so relay is OK Capacitor tested and OK All fans are working including Coiled fan. However, the compressor not start (not running) when I plugged in the power. Can you tell me what else can be wrong? Thanks

thx man

This illustrates why “dishwashers” are really only “dish rincers” and dished should have food deposits rinsed away first.

Great video! And no annoying background music. Ty! ❤

I have a Maytag french door bottom freezer. It stopped making ice. I've replaced the icemaker and water valve. I still don't get any ice and there's no power at the ice maker when I run the tests. Freezer is at 0 degrees. Could it be the Jazz board not sending power to the ice maker? The door switch seems to work fine when I held it during the tests. This fridge doesn't have any door features such as ice or water in the door, just a basic with the ice maker in the bottom.

Thank you so much man, 4 years later this still works!!

Quick, clean, useful video! Thanks!

Thank you for this video kind sir. My model of Ryobi door closer doesn’t have the backcheck knob. Any idea how to make the door opening easier for my kids? It’s a bit stiff when following manual.

Thank you so much ❤️

If I hook my recharge hose to the low side without a can on the other side if I bleed some of the Freon out will air get back into my system?

Omg thank you for ur video!!!! Saved me a lot of trouble!!!! 🙏🏽🙏🏽🙏🏽

Wrong.

Clever fix.

mine sounds like that but not cooling the freezer, check the thermistor all seem to check out

When you reset one does it reset the other house members too.

My fridge works but freezer doesn’t. During reset it started working again but after the test cycle it stops working again. Anything else you guys think I can troubleshoot to fix the issue?

This is my third time utilizing this video to do a repair. Thank you. It’s my favorite and will be stored in my liked videos forever.

This works.Watch the whole video to understand what to do.If not then something besides your pressures are the problem.Thanks good info.Now I'm going to check out your other videos.

Mine got fixed after clicking in this video.

Has anyone ever noticed there's no engine splash guard pan under your car like most cars. When it rains a good bit and water splashes under the car have you noticed your xt5 smoking due to the hot exhaust ? I've observed the 2.0 xt5 has a cover plate engine splash guard but the V6 xt5 versions do not . So I actually thought mine was missing and tried to order one through Cadillac and they didn't even know that GM does not make them for the V6 version. I think it would be an important part to have especially when it rains a lot and you have to hit puddles you can't swerve around. I've hit up GM to ask them why didn't they have a engine splash guard designs for the V6 and they couldn't answer my question

Thank you bro it was very helpful I appreciate it

Great video. Helped me find the issue. Thanks 😊

En castellano por favor

My sensors were aligned, door still not closing unless I pressed the button and held it down. Eventually I sprayed lube on the rails and wheels, and that fixed it 👍🏻

It worked-first try! Funny enough, the instructions (literally written on the back of the remote) did not 😑 You the man! Thanks!

Thanks

I have a question, i was trying this in my car, my pressure was above 120 psi, i got it down to 80, but it won't go any lower. I held it fkr minutes and it didn't go any lower. Any thoughts?

Why put it back together again before you test it?

Thanks I was able to fix it after watching your video

I see continuous 15-16v between terminals v and n with a jump to 118v for the water refill step. Is this normal? The continuous low voltage threw me off.

Thank you

It worked! Thanks!

Great video, THANK YOU!!!!

A toothpick felt inside the oven hole . I'm scared to turn it on can it catch on fire?

not blind

Didn’t work I am stuck on soak

Thank you! Used your video to troubleshoot my 14.5 years old water heater; top unit ok (V, I) but bottom unit is dead. Before it died, water was extremely hot (though both were at 125F). More likely both heating elements are dead

Same thing happened to me but it did t blow fuse- seems like it fried the actual outlet.. I wish it was just the fuse…

It’s gross to throw dishes and silverware in the washer without rinsing them first. Dishwashers are the final step in sanitizing, not the total step.